| SecureMode Rapid Restore Enterprise Solution - Server Requirements | |
| System Configurations: | Use
of one of the following hard disk adapter technologies: ATA (EIDE) UDMA 33, ATA 66/100, SCSI (1, 2, 3, Fast, UW, LVD, and 160). |
| Single physical hard disk or one visible hard drive configured with a hardware RAID disk configuration. | |
| Hardware: | 512 MB RAM (1 GB recommended). |
| 50 MB of free disk space for SecureMode Rapid Restore Enterprise software (16 MB contiguous). | |
| Average 2 GB per stored image of free disk space for Site Vault (second hard disk, or disk array, assigned to Site Vault recommended). | |
| Intel® Pentium® III and above, Celeron™, AMD Athlon, AMD Duron. | |
| Single network adapter. Maximum of two network adapters supported. | |
| Network adapter(s) assigned static IP address(es). | |
| Software: | Internet Explorer® 6.0 |
| If using the Server machine to access the Management Station’s Xpoint View and/or Xpoint Chat features, the Java Runtime Environment 2 (Version 1.4.0_01) is required. | |
| Operating Systems: | Windows 2000® Professional, Service Pack 2 or higher (FAT32 or NTFS). |
| Windows 2000® Server(NTFS). | |
| Windows XP® Professional (FAT32 or NTFS) | |
| Windows Networking: | Configured for TCP/IP. |
| Server machine must be configured to resolve SecureMode Rapid Restore Enterprise client machines by name (using NetBIOS, DNS, WINS, etc.). | |
| SecureMode Rapid Restore Enterprise Solution - Agent (client) Requirements | |
| To use SecureMode Rapid Restore Enterprise’s remote Uptime! Emergency Restore and create service partition features, the client must meet the following requirements: | |
| Client must reside on the local LAN segment. | |
| Network card and motherboard must support Wake on LAN (WOL). | |
| Network card and motherboard must support Preboot Execution Environment (PXE). | |
| BIOS must be configured for Wake on LAN and Preboot Execution Environment. | |
| Client must reside on a network containing a DHCP server. | |
| Computer name cannot exceed 12 characters (due to DOS networking stack limitations). | |
| To use SecureMode Rapid Restore Enterprise’s remote Startup feature, the client must meet the following requirements: | |
| Client must reside on the local LAN segment. | |
| Network card and motherboard must support Wake on LAN (WOL). | |
| BIOS must be configured for Wake on LAN. | |
| For additional information, refer to the SecureMode Rapid Restore PC, SecureMode Rapid Restore PRO, and SecureMode Rapid Restore Server minimum requirements sections. | |
| SecureMode Rapid Restore Enterprise Solution - Management Station Requirements | |
| Software: | Internet Explorer® 6.0. |
| Java Runtime Environment (Version 1.4.1 and 1.2.2) is required in order to use the Xpoint View and/or Xpoint Chat features. | |
| Windows Networking: | Configured for TCP/IP. |